Magnetic Filter
Central Heating Problems?
Is the system slow to warm up. Are some radiators completely or partially cold. Do radiators need frequent bleeding. Is radiator water dirty and discoloured. Radiators with pin hole perforations and leakage. Are there kettling noises from the boiler. Do you have repeated pump failures.
Any of these symptoms could indicate that your system has circulation and flow problems resulting from internal corrosion and the subsequent formation of rust, sludge, and scale deposits.
A Clearflow power flush can restore circulation and efficiency to the heating system by removing these undesirable products. It purges them from the system, and replaces aggressive water with clean water, chemically treated with Systemsafe-DM corrosion inhibitor to prevent future problems.
As soon as a heating system is completed and filled with water, deterioration of the system begins. The combination of water, air, a mixture of metals, and even installation debris and contaminants can result in interna corrosion, sludge formulation in low flow areas, and scaling of boilers and heat exchangers.
Symptoms include cold panels in radiators, blocked radiators, irritating boiler noises, a long recovery time after drawing off hot water, an inadequate water supply, and failure of pumps, radiators and valves.
These problems are not inevitable, and good care and maintenance of a system, and the additions to the heating system of a quality corrosion and scale inhibitor, such as Systemsafe-DM, will prevent and often cure them.
